Home / Workplace Safety Signs / Beryllium Warning Signs
Beryllium Warning Signs
Aerospace and electronics machining shops post this sign at each approach to a beryllium regulated area, so each employee can read and understand it before entering. The legend begins DANGER, REGULATED AREA, BERYLLIUM and ends with a respirator and equipment line that is part of the fixed wording.
18" x 12"
Exact previewReal size
UV printedOutdoor inks
State rules shownAs you design
Beryllium Warning Sign prices
| Size | Aluminum | Plastic | Reflective |
|---|---|---|---|
| 12" x 18" | $42.95 | $25.95 | $68.95 |
| 18" x 12" | $42.95 | $25.95 | $68.95 |
| 24" x 18" | $63.95 | $40.95 | $137.95 |
| 36" x 24" | $126.95 | $81.95 | $274.95 |
Per sign, one side. Shipping $9.99, free on $99+.
Where beryllium warning signs are used
A CNC cell in a machining bay, a grinding room where beryllium parts get their final finish and a prototype lab with a manual mill are spots where a shop puts this sign on the door. The EHS manager or lead machinist orders it so that visiting inspectors, temporary workers and maintenance crews see the warning before they step over the threshold. It solves a plain problem: the people who walk into a machining cell are often not the people who run it, and the sign tells them the room is a regulated area.
Choosing the size and where to hang it
Mount one sign on each approach to the regulated area, at a height people read as they come through. The 36 x 24 inch landscape size suits a wide cell opening, and the 12 x 18 inch portrait size fits a machine door or a post. Choose .040 inch rust-free aluminum for a fixed room, and plastic at .020 inch for a changing zone. Reflective aluminum suits only a route used after dark. Holes of 1/4 inch sit in aluminum, while plastic relies on brass grommets.
Questions about beryllium warning signs
Does a construction job need a beryllium sign?
The construction beryllium rule (29 CFR 1926.1124) has no regulated area sign requirement. General industry and shipyards do have one, and both use the same words. A crew on a construction job should ask its safety officer whether a sign fits the work.
Must the sign be read, or is being seen enough?
The beryllium rule says each employee must be able to read and understand the sign, and that its legend must be legible and readily visible. Put it where a worker sees it from the approach, and choose a size that reads from there. The rule names no language, so check which languages your crew reads.
Can the respirator line be left off?
No. The line WEAR RESPIRATORY PROTECTION AND PERSONAL PROTECTIVE CLOTHING AND EQUIPMENT IN THIS AREA is part of the beryllium legend and always prints. The sign is seven lines in total, counting the DANGER header.
Why is REGULATED AREA the first line instead of DANGER alone?
DANGER is the signal word in the header. Right under it, the rule puts REGULATED AREA and then the material name, BERYLLIUM. This sign keeps that order because the wording is fixed, so a reader meets the regulated area message first.
Which material suits a machining shop?
The .040 inch aluminum resists rust and carries a gloss print on one or two sides. Plastic at .020 inch is light, flexible and fitted with brass grommets. Reflective aluminum uses engineer-grade vinyl on .040 aluminum and shows in headlights if the door faces a drive used at night.
Related signs
Asbestos Warning Signs
For abatement and renovation crews at each asbestos regulated area
From $42.95 aluminum · $25.95 plasticCadmium Warning Signs
For plating shops, inside each cadmium regulated area and at its approaches
From $42.95 aluminum · $25.95 plasticBenzene Warning Signs
For refineries, at the entrances to each benzene regulated area
From $42.95 aluminum · $25.95 plasticFormaldehyde Warning Signs
For funeral homes and labs, at all entrances and access ways
From $42.95 aluminum · $25.95 plastic